Power on the equipment you want to control. While still holding the device button, press and hold the power button on the universal remote until the light turns off and on about three seconds.
Release the power and device buttons. Press the power button on the universal remote to scan through the available remote codes. Press the Stop button on the universal remote to save the remote code. Where can I purchase an RCA universal remote control? How do I reprogram an RCA universal remote control? There are two possibilities: You used the wrong remote code. In this case, you can try the process again with a different RCA universal remote code.
This can sometimes happen with pieces of equipment that have a lot of specialized functions. In this case, the only thing you can really do is try a different universal remote.
After this, your TV should turn off. If it does not turn the TV off, press the Play or Slow button again. Repeat this process every five seconds until the device turns off. Once the device turns off that means the remote control should be in sync with your TV. If this process does not work, try to be patient.
Just repeat these steps, making sure you are pressing the buttons the full time that is needed. The first thing you need to make sure is that your universal remote has an option for it. Say, for example, DVD, streaming device, Blu-ray, etc.
Here are the instructions you need to follow. Manually turn on the device you want to set up, making sure that your RCA universal remote is aiming towards it.
Press and hold the button that matches the device you are pairing. Wait for the light on the remote to blink and then stay steady for you to follow the next step. Press and hold the device button at the same time as the Power button, until the light turns off and on. Most of the time this takes up to five seconds. Release both the Power and the device button. The Power button light must stay on… if it does not, repeat steps 2 and 3. If the component turns off that means the control already found the code for it to pair with your device.
After this is done, press the Stop button to save the code for that device, and check all functions to make sure they are working. If not, repeat the steps again until it works. Find your type of TV. Get the right service with the channels you want when you compare and order service on Allconnect, for free. While following the steps to program an RCA universal remote to your device, a problem can arise. There can be two reasons behind this. If you have used the wrong remote code, then this problem is likely to occur.
You can use a new code on the same device to resolve this problem. Sometimes, the device can turn off and it may seem like your remote has become connected with your device. However, the remote might not support your device fully. The auto-programming function is not always effective. If that method did not work, your RCA universal remote came with a codebook.
The codebook has thousands of codes from almost every TV manufacturer. Find your TV brand in the codebook. Circle the potential codes. RCA Universal Codes are numeric and vary in legth depending on the devices brand. Hold down the TV button, the power light will become illuminated. An example code is for an LG Television.
If the power light remains illuminated, you have entered the code correctly. Once the proper code has been entered, release the TV button. Test the various functions, including volume, menu, etc. There are some codes that will only control half of the remote.
If you are doing the auto-programming method, the code search buttons will be the Play Button and Reverse Button. There are two methods, the auto-programmed method and the codebook method.
Depending on the age of your TV, you might have to try both methods to set up the remote. To reset an RCA Universal Remote if it isn't working properly, remove the batteries and press and hold the number 1 on the remote for a few seconds.
This action resets the remote's internal microprocessor.
0コメント